{"id":6226,"date":"2024-12-27T14:39:08","date_gmt":"2024-12-27T13:39:08","guid":{"rendered":"https:\/\/mint-heldinnen.de\/?page_id=6226"},"modified":"2025-06-12T19:22:15","modified_gmt":"2025-06-12T17:22:15","slug":"gummiband-boot-step-by-step","status":"publish","type":"page","link":"https:\/\/mintheldinnen.enjoythistool.com\/en\/gummiband-boot-step-by-step\/","title":{"rendered":"Gummi-Boot-Step-by-Step"},"content":{"rendered":"\n
\n
\n
\n
\n
\n
\n \n
\n
\n <\/div>\n<\/div>\n\n
\n
\n

Instructions for a rubber band boat<\/h1> <\/div>\n<\/div>\n\n
\n
\n

This guide consists of 4 parts.<\/p> <\/div>\n<\/div>\n\n

\n
\n

1. The hull\u00a0<\/a><\/h2>\n

2. The rotor holder\u00a0<\/a><\/h2>\n

3. The rotor\u00a0<\/a><\/h2>\n

4. Ship's bottom and bow<\/a><\/h2> <\/div>\n<\/div>\n\n
\n
\n <\/use><\/svg><\/em>\n Scroll down<\/span>\n <\/div>\n <\/div>\n\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n \n
\n
\n

The hull<\/h3> <\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

1.1.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Choose a form:<\/strong> In TinkerCAD you will find many shapes on the right side. Take a rectangular box and drag it onto the workspace (the blue grid). This box will be the body of your boat.\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0001\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

1.2.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Set the size:<\/strong> You can resize it by clicking and dragging the white corners. Make the boat about 100mm long, 40mm wide and 10mm high (you'll see the dimensions when you select the box).<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0002\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

1.3.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Hollow out the ground:<\/strong> Now let's make the boat lighter. Drag another smaller box into the large box and mark it as a "Hole" (click on "Hole" in the menu bar at the top right). Position the smaller box so that it is just above the ground (leave about 1 mm of space) and group the two boxes. Now your boat is hollow on the inside!<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0003\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

1.4.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Your boat should look like the picture below.<\/p>\n

You are welcome to shape your boat according to your own ideas; the instructions continue to work with this basic shape.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0005\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n \n
\n
\n

The rotor holder<\/h3> <\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.1.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Holding device for the rubber band:<\/strong> Draw two cylinders on the back of the boat. These cylinders will later hold the elastic band. Make them about 5 mm high and 3 mm in diameter. Place them evenly on both sides.<\/p>\n

Tip<\/b>: You can change the shape, for example, use oval cylinders to make your design unique.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0006\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.2.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Take a cuboid from the right bar and place it between the rubber band holders.<\/p>\n

Tip:<\/strong> You can use the align tool to center the box on the ship.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0007\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.3.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Push the box as a hole through the ship.<\/p>\n

Then mark both parts and combine them together. After that, your boat should have a hole, as shown in the next picture.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0008\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.4.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Add a wedge as a hole. Resize it so that it is as wide as the boat's side. The straight end will be at the back of the boat. The length should be approximately the length of the cutout.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0016\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.5.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Combine the holes with the boat. Then pull the rubber band holders down onto the edge of the boat.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0017\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

2.6.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Your boat should look something like this picture.<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0018\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n \n
\n
\n

The rotor<\/h3> <\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

3.1.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Place a cuboid in the gap between the boat. The middle of the cuboid should be at the height of the rubber band holders. The end of the cuboid should not touch the boat. The sides of the cuboid should not touch the boat either. There should be a medium-sized gap between the cuboid and the boat.<\/p>\n

Tip<\/b>: You can change the shape, e.g. round the cuboid like in the picture.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0020\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

3.2.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Mark the placed cuboid. Duplicate the cuboid. Rotate it by 90\u00b0. Now your boat should look like the picture.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0022\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

3.3.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Repeat the process, only turning the new blocks by 45\u00b0. Your boat should now look like the picture.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0024\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

3.4.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Tip:<\/strong> To prevent the rubber band from slipping, you can drill two holes on the sides of the rotor.<\/p>\n

Always remember that this guide is just an idea, a suggestion. Feel free to change everything according to your own ideas.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0009\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n \n
\n
\n

ship's bottom and bow<\/h3> <\/div>\n<\/div>\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

4.1.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Take the \u201croof\u201d shape and place it at the front of the boat.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0025\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

4.2.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Mark both parts and combine them together. Take the \u201cRound Roof\u201d shape and place it on the bottom of your boat. Mark both parts again and combine them together.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0026\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

4.3.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Take the \u201cParaboloid\u201d shape and place it under the front of your boat.<\/p>\n

Mark both parts and combine them<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0027\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

4.4.<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Your boat should look like the picture.<\/p>\n

And can now be printed.<\/p>\n

Tip:<\/strong> You can customize any shape or use others, be creative, have fun and create a boat of your dreams.<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"Gummiband-Boot-Anleitung-0028\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n
\n
\n
\n
\n
\n <\/div>\n <\/div>\n
\n
\n \n
\n
\n

Ready<\/b><\/p> <\/div>\n<\/div>\n\n

\n
\n

Send us a photo or screenshot when you have a result. You will receive a button and a sticker with the pirate for this adventure.<\/p>\n

team@mint-heldinnen.de<\/a><\/p>\n

Best regards, Dennis and Amanda<\/p>\n

\u00a0<\/p> <\/div>\n<\/div>\n <\/div>\n

\n \n
\n
\n \"mint-heldinnen-button-sticker-piratin\" \n <\/div>\n \n \n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n <\/div>\n","protected":false},"excerpt":{"rendered":"

Instructions for a rubber band boat<\/p>","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"footnotes":""},"class_list":["post-6226","page","type-page","status-publish","hentry","has-post-title","has-post-date","has-post-category","has-post-tag","has-post-comment","has-post-author",""],"yoast_head":"\nGummi-Boot-Step-by-Step - MINT-Heldinnen<\/title>\n<meta name=\"robots\" content=\"noindex, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Gummi-Boot-Step-by-Step - MINT-Heldinnen\" \/>\n<meta property=\"og:description\" content=\"Anleitung Gummiband-Boot\" \/>\n<meta property=\"og:url\" content=\"https:\/\/mintheldinnen.enjoythistool.com\/en\/gummiband-boot-step-by-step\/\" \/>\n<meta property=\"og:site_name\" content=\"MINT-Heldinnen\" \/>\n<meta property=\"article:modified_time\" content=\"2025-06-12T17:22:15+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1400\" \/>\n\t<meta property=\"og:image:height\" content=\"801\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"13 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/\",\"url\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/\",\"name\":\"Gummi-Boot-Step-by-Step - MINT-Heldinnen\",\"isPartOf\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage\"},\"image\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage\"},\"thumbnailUrl\":\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg\",\"datePublished\":\"2024-12-27T13:39:08+00:00\",\"dateModified\":\"2025-06-12T17:22:15+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage\",\"url\":\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg\",\"contentUrl\":\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Startseite\",\"item\":\"https:\/\/mintheldinnen.enjoythistool.com\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Gummi-Boot-Step-by-Step\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#website\",\"url\":\"https:\/\/mintheldinnen.enjoythistool.com\/\",\"name\":\"MINT-Heldinnen\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/mintheldinnen.enjoythistool.com\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#organization\",\"name\":\"MINT-Heldinnen\",\"url\":\"https:\/\/mintheldinnen.enjoythistool.com\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/04\/MINTHeldinnenLogo.png\",\"contentUrl\":\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/04\/MINTHeldinnenLogo.png\",\"width\":1800,\"height\":1216,\"caption\":\"MINT-Heldinnen\"},\"image\":{\"@id\":\"https:\/\/mintheldinnen.enjoythistool.com\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.instagram.com\/mint.heldinnen\/\",\"https:\/\/www.linkedin.com\/company\/mint-heldinnen\/\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Gummi-Boot-Step-by-Step - MINT-Heldinnen","robots":{"index":"noindex","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"og_locale":"en_US","og_type":"article","og_title":"Gummi-Boot-Step-by-Step - MINT-Heldinnen","og_description":"Anleitung Gummiband-Boot","og_url":"https:\/\/mintheldinnen.enjoythistool.com\/en\/gummiband-boot-step-by-step\/","og_site_name":"MINT-Heldinnen","article_modified_time":"2025-06-12T17:22:15+00:00","og_image":[{"width":1400,"height":801,"url":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","twitter_misc":{"Est. reading time":"13 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/","url":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/","name":"Gummi-Boot-Step-by-Step - MINT-Heldinnen","isPartOf":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage"},"image":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage"},"thumbnailUrl":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg","datePublished":"2024-12-27T13:39:08+00:00","dateModified":"2025-06-12T17:22:15+00:00","breadcrumb":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#primaryimage","url":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg","contentUrl":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg"},{"@type":"BreadcrumbList","@id":"https:\/\/mintheldinnen.enjoythistool.com\/gummiband-boot-step-by-step\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Startseite","item":"https:\/\/mintheldinnen.enjoythistool.com\/"},{"@type":"ListItem","position":2,"name":"Gummi-Boot-Step-by-Step"}]},{"@type":"WebSite","@id":"https:\/\/mintheldinnen.enjoythistool.com\/#website","url":"https:\/\/mintheldinnen.enjoythistool.com\/","name":"STEM heroines","description":"","publisher":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/mintheldinnen.enjoythistool.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/mintheldinnen.enjoythistool.com\/#organization","name":"STEM heroines","url":"https:\/\/mintheldinnen.enjoythistool.com\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/mintheldinnen.enjoythistool.com\/#\/schema\/logo\/image\/","url":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/04\/MINTHeldinnenLogo.png","contentUrl":"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/04\/MINTHeldinnenLogo.png","width":1800,"height":1216,"caption":"MINT-Heldinnen"},"image":{"@id":"https:\/\/mintheldinnen.enjoythistool.com\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.instagram.com\/mint.heldinnen\/","https:\/\/www.linkedin.com\/company\/mint-heldinnen\/"]}]}},"builder_content":"<meta name=\"viewport\" content=\"width=device-width, initial-scale=1.0, maximum-scale=1.0, user-scalable=no\">\n<h1>Anleitung Gummiband-Boot<\/h1>\n<p>Diese Anleitung besteht aus 4 Teilen.<\/p>\n<h2><a href=\"#Schritt1\">1. Der Bootsk\u00f6rper\u00a0<\/a><\/h2> <h2><a href=\"#Schritt2\">2. Der Rotorhalter\u00a0<\/a><\/h2> <h2><a href=\"#Schritt3\">3. Der Rotor\u00a0<\/a><\/h2> <h2><a href=\"#Schritt4\">4. Schiffsboden und Bug<\/a><\/h2>\n<em style=\"background-color:#999999;color:#edf3ff\"><svg aria-hidden=\"true\"><use href=\"#tf-ti-arrow-down\"><\/use><\/svg><\/em> Scroll nach unten\n<h3>Der Bootsk\u00f6rper<\/h3>\n<p><b>1.1.<\/b><\/p>\n<p><strong>Suche eine Form aus:<\/strong> In TinkerCAD findest du auf der rechten Seite viele Formen. Nimm eine rechteckige Box und ziehe sie auf die Arbeitsfl\u00e4che (das blaue Raster). Diese Box ist der K\u00f6rper deines Boots.\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg\" title=\"Gummiband-Boot-Anleitung-0001\" alt=\"Gummiband-Boot-Anleitung-0001\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001-300x172.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001-1024x586.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001-768x439.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0001-18x10.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>1.2.<\/b><\/p>\n<p><strong>Stelle die Gr\u00f6\u00dfe ein:<\/strong> Du kannst die Gr\u00f6\u00dfe ver\u00e4ndern, indem du auf die wei\u00dfen Ecken klickst und ziehst. Mach das Boot etwa 100 mm lang, 40 mm breit und 10 mm hoch (du siehst die Ma\u00dfe, wenn du die Box ausw\u00e4hlst).<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002.jpg\" title=\"Gummiband-Boot-Anleitung-0002\" alt=\"Gummiband-Boot-Anleitung-0002\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002-300x155.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002-1024x528.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002-768x396.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0002-18x9.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>1.3.<\/b><\/p>\n<p><strong>H\u00f6hle den Boden aus:<\/strong> Jetzt machen wir das Boot leichter. Ziehe eine weitere kleinere Box in die gro\u00dfe Box und markiere sie als \"Bohrung\" (klicke auf \"Bohrung\" in der Men\u00fcleiste oben rechts). Positioniere die kleinere Box so, dass sie knapp \u00fcber dem Boden ist (lass etwa 1 mm Platz) und gruppiere die beiden Boxen. Jetzt ist dein Boot von Innen hohl!<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003.jpg\" title=\"Gummiband-Boot-Anleitung-0003\" alt=\"Gummiband-Boot-Anleitung-0003\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003-300x194.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003-1024x660.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003-768x495.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0003-18x12.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>1.4.<\/b><\/p>\n<p>Dein Boot sollte wie auf dem untersten Bild aussehen.<\/p> <p>Du kannst dein Boot auch gerne nach deinen eigenen Vorstellungen Formen, in der Anleitung wird weiter mit dieser Grundform gearbeitet.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005.jpg\" title=\"Gummiband-Boot-Anleitung-0005\" alt=\"Gummiband-Boot-Anleitung-0005\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005-300x137.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005-1024x466.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005-768x349.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0005-18x8.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<h3>Der Rotorhalter<\/h3>\n<p><b>2.1.<\/b><\/p>\n<p><strong>Haltevorrichtung f\u00fcr das Gummiband:<\/strong> Ziehe zwei Zylinder auf die R\u00fcckseite des Boots. Diese Zylinder halten sp\u00e4ter das Gummiband. Mach sie etwa 5 mm hoch und 3 mm im Durchmesser. Platziere sie gleichm\u00e4\u00dfig auf beiden Seiten.<\/p> <p><b>Tipp<\/b>: Du kannst die Form ver\u00e4ndern, z.B. ovale Zylinder nehmen, um dein Design einzigartig zu machen.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006.jpg\" title=\"Gummiband-Boot-Anleitung-0006\" alt=\"Gummiband-Boot-Anleitung-0006\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006-300x162.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006-1024x554.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006-768x416.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0006-18x10.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>2.2.<\/b><\/p>\n<p>Nimm einen Quader aus der rechten Leiste und platziere ihn zwischen die Gummibandhalter.<\/p> <p><strong>Tipp:<\/strong> Du kannst das Ausrichten-Tool nutzen um die Box auf das Schiff zu zentrieren.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007.jpg\" title=\"Gummiband-Boot-Anleitung-0007\" alt=\"Gummiband-Boot-Anleitung-0007\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007-300x112.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007-1024x381.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007-768x286.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0007-18x7.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>2.3.<\/b><\/p>\n<p>Schiebe den Kaste als Bohrung durch das Schiff.<\/p> <p>Makiere dann beide Teile und kombiniere diese miteinander. Danach sollte euer Boot ein Loch haben, wie auf dem n\u00e4chsten Bild zu sehen.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008.jpg\" title=\"Gummiband-Boot-Anleitung-0008\" alt=\"Gummiband-Boot-Anleitung-0008\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008-300x70.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008-1024x238.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008-768x179.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0008-18x4.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>2.4.<\/b><\/p>\n<p>F\u00fcge ein Keil als Bohrung hinzu. Ver\u00e4ndere die Gr\u00f6\u00dfe so, dass er so breit ist wie die Bootwand. Das gerade Ende ist hinten am Boot. Die L\u00e4nge sollte ungef\u00e4hr die L\u00e4nge des Ausschnittes betragen.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016.jpg\" title=\"Gummiband-Boot-Anleitung-0016\" alt=\"Gummiband-Boot-Anleitung-0016\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016-300x135.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016-1024x462.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016-768x347.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0016-18x8.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>2.5.<\/b><\/p>\n<p>Kombiniere die Bohrungen mit dem Boot. Ziehe anschlie\u00dfend die Gummibandhalter nach unten auf den Rand des Bootes.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017.jpg\" title=\"Gummiband-Boot-Anleitung-0017\" alt=\"Gummiband-Boot-Anleitung-0017\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017-300x121.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017-1024x412.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017-768x309.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0017-18x7.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>2.6.<\/b><\/p>\n<p>Dein Boot sollte ungef\u00e4hr wie auf diesem Bild aussehen.<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018.jpg\" title=\"Gummiband-Boot-Anleitung-0018\" alt=\"Gummiband-Boot-Anleitung-0018\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018-300x113.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018-1024x387.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018-768x290.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0018-18x7.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<h3>Der Rotor<\/h3>\n<p><b>3.1.<\/b><\/p>\n<p>Platziere in der L\u00fccke vom Boot eine Quader. Die Mitte des Quaders sollte auf der H\u00f6he der Gummibandhalter sein. Das Ende des Quaders darf das Boot nicht ber\u00fchren. Die Seiten des Quaders d\u00fcrfen das Boot ebenfalls nicht ber\u00fchren. Zwischen dem Quader und dem Boot sollte eine mittelgro\u00dfe L\u00fccke sein.<\/p> <p><b>Tipp<\/b>: Du kannst die Form ver\u00e4ndern, z.B. den Quader abrunden wie auf dem Bild.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020.jpg\" title=\"Gummiband-Boot-Anleitung-0020\" alt=\"Gummiband-Boot-Anleitung-0020\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020-300x160.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020-1024x547.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020-768x410.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0020-18x10.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>3.2.<\/b><\/p>\n<p>Makiere den platzierten Quader. Dupliziere den Quader. Drehe in um 90\u00b0. Nun sollte dein Boot wie auf dem Bild aussehen.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022.jpg\" title=\"Gummiband-Boot-Anleitung-0022\" alt=\"Gummiband-Boot-Anleitung-0022\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022-300x150.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022-1024x511.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022-768x383.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0022-18x9.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>3.3.<\/b><\/p>\n<p>Wiederhole den Vorgang. Drehe dabei die neuen Quader nur um 45\u00b0. Dein Boot sollte nun wie auf dem Bild aussehen.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024.jpg\" title=\"Gummiband-Boot-Anleitung-0024\" alt=\"Gummiband-Boot-Anleitung-0024\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024-300x161.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024-1024x548.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024-768x411.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0024-18x10.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>3.4.<\/b><\/p>\n<p><strong>Tipp:<\/strong> Damit das Gummiband nicht abrutschen kann, kannst du zwei L\u00f6cher an den Seiten des Rotors bohren.<\/p> <p>Denk immer daran, diese Anleitung ist nur eine Idee, ein Vorschlag. Ver\u00e4ndere gerne alles nach deinen eigenen Vorstellungen.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009.jpg\" title=\"Gummiband-Boot-Anleitung-0009\" alt=\"Gummiband-Boot-Anleitung-0009\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009-300x147.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009-1024x503.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009-768x377.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0009-18x9.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<h3>Schiffsboden und Bug<\/h3>\n<p><b>4.1.<\/b><\/p>\n<p>Nimm die Form \"Dach\" und platziere sie vorne an das Boot.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025.jpg\" title=\"Gummiband-Boot-Anleitung-0025\" alt=\"Gummiband-Boot-Anleitung-0025\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025-300x167.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025-1024x570.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025-768x427.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0025-18x10.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>4.2.<\/b><\/p>\n<p>Markiere beide Teile und kombiniere sie miteinander. Nimm die Form \u201cRund Dach\u201d und platziere sie auf der Unterseite deines Bootes. Markiere wieder beide Teile und kombiniere sie miteinander.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026.jpg\" title=\"Gummiband-Boot-Anleitung-0026\" alt=\"Gummiband-Boot-Anleitung-0026\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026-300x149.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026-1024x510.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026-768x382.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0026-18x9.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>4.3.<\/b><\/p>\n<p>Nimm die Form \u201cParaboloid\u201d und platziere sie vorne unter dein Bott.<\/p> <p>Markiere beide Teile und kombiniere sie<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166.jpg\" title=\"Gummiband-Boot-Anleitung-0027\" alt=\"Gummiband-Boot-Anleitung-0027\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166-300x198.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166-1024x677.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166-768x508.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0027-e1735930039166-18x12.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>4.4.<\/b><\/p>\n<p>Dein Boot sollte wie auf dem Bild aussehen.<\/p> <p>Und kann nun gedruckt werden.<\/p> <p><strong>Tipp:<\/strong> Du kannst alle Formen anpassen oder auch andere verwenden, sei kreativ, tobe dich aus und erstelle ein Boot deiner Tr\u00e4ume.<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028.jpg\" title=\"Gummiband-Boot-Anleitung-0028\" alt=\"Gummiband-Boot-Anleitung-0028\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028.jpg 1400w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028-300x152.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028-1024x519.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028-768x389.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2025\/01\/Gummiband-Boot-Anleitung-0028-18x9.jpg 18w\" sizes=\"(max-width: 1400px) 100vw, 1400px\" \/>\n<p><b>Fertig<\/b><\/p>\n<p>Schickt uns doch ein Foto oder einen Screenshot, wenn ihr ein Ergebnis habt. Ihr bekommt f\u00fcr dieses Abenteuer einen Button und einen Sticker mit der Piratin.<\/p> <p><a href=\"mailto:team@mint-heldinnen.de\">team@mint-heldinnen.de<\/a><\/p> <p>Viele Gr\u00fc\u00dfe Dennis und Amanda<\/p> <p>\u00a0<\/p>\n<img src=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin.jpg\" title=\"mint-heldinnen-button-sticker-piratin\" alt=\"mint-heldinnen-button-sticker-piratin\" srcset=\"https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin.jpg 1200w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin-300x168.jpg 300w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin-1024x574.jpg 1024w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin-768x431.jpg 768w, https:\/\/mintheldinnen.enjoythistool.com\/wp-content\/uploads\/2024\/12\/mint-heldinnen-button-sticker-piratin-18x10.jpg 18w\" sizes=\"(max-width: 1200px) 100vw, 1200px\" \/>","_links":{"self":[{"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/pages\/6226","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/comments?post=6226"}],"version-history":[{"count":0,"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/pages\/6226\/revisions"}],"wp:attachment":[{"href":"https:\/\/mintheldinnen.enjoythistool.com\/en\/wp-json\/wp\/v2\/media?parent=6226"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}